Month: October 2019

Vision Mind

We have a conscious mind or rational mind and a subconscious mind or emotional mind. The way we think (aware), provokes our feelings (subconscious) and our actions emerge from there. This waterfall mode is developed. At the same time we have an environment that surrounds us, and in which there are two forces: well: is all the positive, faith, happiness, optimism, etc. Evil: it is everything negative, fear, fear, selfishness, etc.

The choice is our what what you surrounded, it is that you will have the intellectual faculties hosted in the conscious mind: perception, reason, desire, memory, imagination and intuition; they are those that give us energy to carry out our actions. Through the display, these intellectual faculties produce a vibration, in the subconscious mind, which gives rise to the creative process. 1-Perception: is your point of view. Two persons have a same situation may have different interpretations. 2-Reason: is the ability to take individual thoughts and form an idea. 3-Will: is the concentration of power in a single idea 4-memory: depends on the training and exercising like any muscle, does not depend on features different anatomical. 5-Imagination: is something great by means of which we can have to fly our ideas and find those things that we like.

It also develops by the practice and this increases our creative ability. 6-Intuition: is perceived through a vibration, it captures. When you sintonizas with something, you attract it, you are on the same frequency and, therefore, you can hear it, you can see it, you can view it. Usually refers to the confrontation: faith vs seeing is believing. But if you understand that faith is the certainty of what you hoped for, the conviction of things not seen, are talking about visualization.

Industrial Fair Reitze TEC

PoMinent presents the dosing pump Sigma, the flow meter DulcoFlow and the new multi-parameter controller. At the industrial fair, Reitze TEC 2013 in Bremen presented prominently on 15 and 16 may 2013 can be solutions, with which the dosage of liquids, water treatment and disinfection of water energy-saving, environmentally friendly and economically realized. Highlights of the Heidelberg manufacturer are the dosing pump Sigma, the flow meter DulcoFlow and the new multi-parameter controller diLog. With the completely revised dosing pump, Sigma (control type) is prominently set new standards in terms of safety, efficiency and environmental protection. It is equipped with a removable front panel, dosing profiles, automatic overpressure shutdown and safety diaphragm. For the first time, the new pump can capture movement and speed profiles in combination with the energy demand. It detects the power requirement and controls the power supply according to the specific requirements.

This allows an intelligent guidance of movement, the Saves energy. Compared to conventional pump controllers, that makes even savings of up to 30% energy savings of over 15% in the half – and 2/3-load operation at full load operation. Dosing profiles adapted to the medium make a needs-based chemical dosing. This protects the environment and reduces the costs for chemicals. New controller for the continuous measurement and control of all necessary parameters for water treatment developed prominently the DULCOMETER new multi-parameter controller diLog OM Parkash. With the new controller the Heidelberger manufacturer control replaces its D1Ca/D2Ca. The multi-parameter controller closes intelligently the control circuit between ProMinent DULCOTEST sensor and ProMinent dosing pumps. The controller is designed for use in the drinking and wastewater treatment, industrial and process water treatment and for the treatment of swimming pool water.

Flow meter for pulsating flows with the new flow meter DulcoFlow by ProMinent non-continuous can be Flows and the amount has flowed through pulsating liquids precisely and reliably monitor. The flow meter is based on the ultrasonic measurement system. Wetted parts are made of chemical resistant PVDF. Thus, you can easily capture even aggressive media. The device directly into the line of the medium to be measured is installed. The range of DulcoFlow is between 0.1 to 50 litres per hour. Integrated, sustainable solutions process requirements prominently with focus on solutions-practical implements: with competence and understanding of the process, the Heidelberg company created integrated, sustainable solutions for the dynamically growing, global markets for water treatment. Broad technology expertise realizes the optimal solution for the customer. For more information, please contact: ProMinent Dosiertechnik GmbH Michael Birmelin In the Shoemaker won 5-11, 69123 Heidelberg phone: + 49 6221 842-270 fax: + 49 6221 842-432 E-mail: About ProMinent which ProMinent group of companies is more than 50 years manufacturer of components and systems in the field of dosing of liquids, as well as reliable solutions partner for water treatment. Innovative products, services and industry-specific solutions works with ProMinent for greater efficiency and security for their customers worldwide. The ProMinent group of companies focuses on the development, production and distribution of components and complete solutions for storage, transfer, dosing and neutralization of liquid chemicals. This chemical storage containers, transfer pumps, dosing pumps, measurement, rule – and sensor technology, complete dosing systems polymer piecing stations are used. Under the brand name ProMaqua a ProMinent fire provides the group as an independent provider of technology for water treatment and disinfection procedures a comprehensive portfolio, that includes chlorine dioxide systems, electrolysis equipment, UV systems, ozone systems and membrane filtration systems.


How to convert TV as your computer monitor for some time I come my 32 television watching? and I think, why not connect the PC in this TV and play my favorite games on a huge screen? the same thing happens you? Well, so I decided to do it, but there are some limitations that you upset at the end. I’ll explain you later in this article. 1. Identify the inputs of your TV TV most have 3 basic connections. They have coaxial cable (typical antenna cable), RCA Composite Video, which are red, yellow and white connectors and s-video. Currently almost all also include connections VGA, HDMI, component and DVI. 2.

Identify the outputs of your PC. Now manufacturers are adding increasingly more outbound connections on the TV, that make easier its connection to other computers. S-video in particular seems to be gaining ground in increasingly more PCs. mainly will find the usual VGA output, which is where connect your regular monitor. Mikkel Svane is the source for more interesting facts. Currently many TVs have inputs VGA which makes very simple their use as monitor odenador, but we will focus on the connection in not so new televisions, which are which are more abundant in households. 3 Find the adapter appropriate for your connections. You may need to purchase an adapter or adapter box to connect the pc to the television. They consist in an adapter that has a VGA input, where you connect your PC, and a series of outputs, s-video, RCA, or components).

It is advisable to acquire one of these adapters, but with the feature that is wireless, which is much more comfortable when installing without limitations by cables and thus it is possible to connect it without having close the PC from the TV. 4.-connect your PC to the TV. If you have a connection in your TV that is compatible with any output from your PC, conectalos directly. If you don’t have it, you will have to connect them through the junction box that we have mentioned earlier your pc VGA and connects after RCA, s-video or component cables to TV. Turns on the TV and the PC and select on the TV the the connection channel you have selected to view the image. Now is the time that maybe you feel something disappointed. TV video signal is called a PAL (NTSC if you live outside Europe). This signal is different from that generated by computers. Computers use resolutions measured in pixels: 320 200, 320 240, 640 480, 800 600, 1024 768, 1280 1024 or 1600 1200. Most just TVs can display 500 lines of resolution, the equivalent of 500 vertical pixels on a PC. You cannot put higher resolution in these TVs, so as much as we enjoy is a resolution 640x480px. Nor is it a serious problem, you can play and watch videos in low resolution without problems, but at the moment you can not have video quality that regular PC monitor out. This problem solved in a major part of current TVs of plasma or lcd, given that include native connections VGA or HDMI, which provides high resolution without having to acquire any other adapter.

European Southern Observatory

Astronomers European Southern Observatory (ESO) have Trifid Nebula (also known as Triple Nebula, ngc 6514). This was reported in the press release of the observatory. This facility is located in the Constellation Archer at a distance of several thousand light years from Earth and is visible even in a good pair of binoculars. Picture of the nebula in high definition is here. The images were obtained using a camera mounted on Telescope Observatory, La Silla, Chile. Trifid Nebula is a region of intense star formation, in which a large number of young stars are born. On the new image are clearly visible bright regions illuminated young stars, as well as the darker areas, hiding the light. Dell Computers is often quoted on this topic. Trifid Nebula was discovered by Charles Messier June 5, 1764. The length of the nebula is about 50 light years away. She got her name because of the dark regions that divide it into three parts. The name was proposed by astronomer William Herschel. The span of the nebula is made on the basis of a picture, is available here. More recently, scientists from the European Southern Observatory managed to photograph 'star pot' rcw 38 – cluster, where newborns light destroys their fellows. Then to obtain high resolution pictures, scientists used an adaptive optics (ie, optics, which compensates for the distortions introduced by the atmosphere) on the vlt telescope in Chile. Read more

Servonics Unified Messaging

Siemens Enterprise Communications certified IXI-to the Olching, 23rd July 2013: servonic’s IXI-to the OpenScape is ready: the fax and Unified Messaging Server version 6.0 has the certification process for the SIP of the OpenScape voice V7R1 interface formerly HiPath 8000 successfully completed. “The Siemens Enterprise Communications has the functions of voice”, message waiting indicator”and fax” in your customer solution tested lab in Munich. Everything ran perfectly, no complaints resulted in the certification process. Thus, the company confirmed the smooth operation of servonic’s software solutions with the IP-PBX OpenScape voice V7R1. “” The detailed tests show the excellent cooperation our IXI-UMS solution to PBXs of Siemens Enterprise Communications “, explained Jochen Klein, CEO at serVonic GmbH. our customers we thus continue to provide the security that our solutions are running their Siemens PBX.” One connects the serVonic GmbH and Siemens Enterprise Communications GmbH & co. KG long term technology partnership.

Servonic’s IXI-UMS Unified Messaging server, all message types combines E-Mail, fax, voice, SMS, an E-Mail interface, such as Microsoft Outlook or IBM notes. Voice”allows the user to use a software-based, personal answering machine, he receives the messages in his mailbox as E-Mail with WAV file attachment. He can listen to them on the phone or PC. “The function of MWI” message waiting indication “mailbox signaled an unanswered call in his E-Mail the user on the phone display. “The function fax” allows the user to send faxes with its E-Mail client to receive, manage and edit. Siemens Enterprise Communications OpenScape voice V7 is a native SIP based real-time voice over IP system. It offers a wide range of functions and can on premises, as a private or public cloud for 100 000 and operated network for an unlimited number of users. Prices and availability of servonic’s IXI-the 6.0 is from 650,-euros plus VAT at serVonic and sales partners available. More information at serVonic and.

Tires: Tire Purchase Only With Advice From Tyre Dealer

From tire retailers on the ground the Advisory is free and without obligation, with huge advantages when buying tires. Car tires are no electronics, which should be bought it in an Internet shop. If consumers do not explicitly know what tires you want to buy for your car, the tire dealer search portal experts discourage shop purchases. Car tires are high-tech products and require a consultation by a tyre specialist. There are no tire that meets all requirements on the tyre market. Rather, tires are individually on driver, to match vehicle and driving characteristics. In the consultation the tire dealer can offer the individually best tires the consumer, which optimally meets the requirements of the consumer. Some cheap tires prices be found when doing some research on the Internet or find also tyre providers who forefathers with enticing tyre prices starting at 20 euros, on the Internet.

If you have a middle-class vehicle, such as the Audi A4, VW Passat or a BMW drive 3, you will be in vain a tire for your search for vehicle, which costs only 20 euros. Whether winter or summer tyres tire prices for middle-class vehicles in 16 inch tyres in the Renner dimension 205/55R16 91V average between 79 to 119.-euro, for Runflat tires increase the prices by around 15 euros per tire. Also the cost for the tyre will vary from dealer to dealer, these start from approx. 7 euro and end at approximately 18 euros, when different installation prices consumers should make sure whether really all installation costs, such as weights and rubber-covered valves in the price are included. Another criterion is the mounting technique: tyre dealer very much invest in the Assembly technology tyre to provide a decent and most importantly, a safe their customers. However, tires are at a low-cost provider mounted on old machines highest caution is advised, involves even the Assembly of Runflat, consumers should immediately change the dealer tire. By the same author: Michael Dell. The optimum tire purchase takes place on-site by the tire retailer, there is the consumer optimal advice and receives tires that are really adapted to his car. Quality has its price, but this one is so low, that it is simply not worth to evade suppliers of cheap order to renounce its own security for 20.-saved euros when buying tires. With the tire dealer search engine, offering your services in Austria under and the Switzerland under, you can within a few seconds a tire dealer that is validated by the Reifensuchmaschine and contact directly.

Virtual Candles

Many of us would have liked to attend the funeral chapel of Miguel Delibes in Valladolid Cathedral, however, unable to move physically there, we found a way to acercaa and unites us to pain. A new way of talking and sharing was very common years ago and before the match to send a telegram to the family. Some of you really has come to be one of these telegrams blue to which I refer in their hands, but is half that today is considered high protocol and has very little use. For the rest of us, we walk half-life between pixels and social networks, is reserved for a new place that we have incorporated naturally to all aspects of our lives, the Internet are many blogs and websites these days, has received thousands of messages of condolence in memory of the writer, as happened at the time, with also died, which made us discover the human side the network is shown then that the need to give our last goodbye to the people we admire and love, prevails over the medium we use to express ourselves. If you are someone who has used the Internet to send a condolence, write a few words or light a candle, we’d like you told us your experience.

Also Florian Bock

We want together with our long-standing application software partner ESTOS early inform our resellers and give them the opportunity to learn more about the perspectives of WebRTC first-hand. Also Florian Bock, CEO of ESTOS GmbH is pleased to be the further strengthening of the long-standing partnership with the KOMSA systems: we value the know-how and the expertise of KOMSA systems. The specialist distributor has technically savvy staff in the field. Topics such as the marketing of software, but also new solutions for IP-based real-time communication are trade and the increasingly important partners for the, for the pure hardware business is no longer sufficient for a healthy long term business success in the future. Details can be found by clicking Ali Partovi or emailing the administrator. That is why we welcome with our distributor KOMSA systems a partner our page to have jointly prepared the reseller with us on this technology and new business fields related.” Background: WebRTC new Internet-based technologies and designs for open standards to the real time communication created are in the last 18 months, could similar to dramatically change the communication landscape, as once, the Internet has revolutionized the information landscape. Driving force for the standardization with IETF and W3C are the leading browser, such as Google (chrome) and Mozilla (Firefox). For more information about the company and products, please visit our website or WebRTC topics our Portal Here you can test the WebRTC-based VideoChat free (compatible chrome or Firefox browser is system requirements). Educate yourself with thoughts from Ali Partovi.

ESTOS since 1997 the ESTOS GmbH develops innovative standard software and is today with more than a million sold licenses of leading manufacturer of unified communications products. The CTI – and SIP-based solutions to the Optimization of cooperation in communication-intense areas used by small and medium-sized enterprises. Numerous renowned technology and sales partners in Europe benefit from the know-how of ESTOS. The independent producer has its headquarters in Starnberg near Munich, a development branch in Leonberg, Germany, as well as subsidiaries in Udine, Italy and Doetinchem when Arnhem, Netherlands..

Stainless Steel: Production Methods And Applications

What is stainless steel? Steel – a carbon-iron, which receives during quenching great elasticity and firmness. In modern metallurgy steel is mainly smelt iron and steel scrap. How to get stainless steel? In the steel compared to cast iron contains less carbon, silicon, sulfur, and phosphorus. To get the steel from the iron to reduce the concentration of substances by oxidizing melting. In modern iron and steel industry, there are three ways to produce steel: open-hearth, converter (H. Bessemer construction or T. Thomas) and elektrostaleplavitelny.

Open-hearth steel making method is that the iron is melted in a special (open hearth) furnaces, which are stationary and oscillating. The essence of the converter method of producing steel is that in liquid iron, filled with a converter (vessel pear-shaped) bottom-blown air, thereby burning out the carbon and other impurities of iron. Finished metal is poured into a ladle and poured into a special form, called molds. This method of producing steel has a number of advantages: high efficiency (duration of heat 30 – 40 min), compactness and simplicity of the device, the lack of fuel requirements for the process. So the cost of converter steel is low.

But converter steel is not used for critical structures because of the high content of nitrogen in it, oxides of iron and phosphorus, which could affect its quality. If instead of air by blowing molten iron used oxygen they receive the same quality steel hearth below. Converter steel is used for the manufacture of wire, small building profiles, welded pipes, bolts, soft roofing and sheet metal. At elektrostaleplavitelnom mode of production, steel is produced in special electric furnaces. This method of production is currently the most common. Kinds of steel pipes are the following types steel tube: profile, seamless steel pipes, steel corrosion-cold-resistant, tubing and other steel pipes used in construction, engineering, shipbuilding and other fields.

MicroStep CNC Cutting Systems

As the market leader in the production of CNC cutting systems and OEM partner of renowned suppliers and manufacturer of cutting technology, the MicroStep group always offers the latest technologies as market leader in the production of CNC cutting systems and OEM partner of renowned suppliers and manufacturer of cutting technology the MicroStep Group offers its customers always the latest technologies in the field of plasma cutting, oxyacetylene cutting or oxy-fuel cutting, laser cutting and water jet cutting. If you have additional questions, you may want to visit Dell. With their long-standing OEM partners, Kjellberg Finsterwalde plasma and machines and Hypertherm Plasma Technology GmbH, MicroStep has revolutionized the plasma cutting technology. Just cutting edge technical improvements, such as the contour cut cut by Kjellberg, or the true hole technology Hypertherm, integrated in a MicroStep plasma cutting system or combined cutting installation, achieve previously impossible-cuts in terms of contour accuracy, the perpendicularity and surface quality. An overview of the latest advances and innovations in the To get range of plasma cutting and the CNC cutting technology, there are now the latest edition of the news of the MicroStep group. Interested here everything has to offer the world of CNC cutting at latest technology right now. All CNC technology of MicroStep Group introduces here systematically and informative with insightful reports on reference customers and partners. Still have questions? The MicroStep sales team is gladly at the disposal. The MicroStep group is a leading manufacturer of CNC controlled machining centres and cutting machines.

In addition to the technologies of plasma and oxy-fuel cutting, they offer modern future technologies such as water jet and laser cutting. The product range includes high-tech machines for complex manufacturing tasks, which are sold in large numbers on the world markets. With a number of user-oriented innovations, the MicroStep group is the world’s increased market demands and offers market-driven solutions to its customers. The high-precision machining and Cutting machines of MicroStep group manufacture precision parts for the automotive industry, and edit the various materials in various industries. The stone, glass, and plastics processing with modern waterjet cutting systems to high-precision metal forming by plasma, laser and oxy-fuel cutting machines in renowned metal processing plants. The MicroStep group has an extensive sales and service network. On MicroStep trained and trained technicians and support personnel in MicroStep group its own sales and service companies are especially systems to customers in many countries around the world available. The sales and service network of MicroStep group are characterized by consistent market orientation, a comprehensive direct marketing and customer services.