Tag: electronics & information technology

GmbH Hauptstrasse

BMC messsysteme GmbH (bmcm) – innovative measurement technology “made in Germany” has you at first glance almost nondescript. True to the motto “silence water found deep” Board of bmcm hides a multifunctional concept but the highly integrated design of PCI PIO. Two 16-bit ports with reversible direction, CMOS/TTL can be compatible digital signals with the PCI PIO and issued. Due to the low latency of the PCI interface is the PCI PIO for control and regulation tasks. Faye Business Systems Group will undoubtedly add to your understanding. in a free ger/pr-pci-pio.html which is the 3 .3V and 5V PCI short card mode PCI-slot built and powered by the PC. This is unnecessary overhead wiring. Digital circuits are accessible on a D-Sub37 socket from the outside. The PC housing offers optimum protection against interference.

In addition, it can be three any digital inputs connected to 32-bit counter or encoder (if necessary with external counter reset), so that the PCI PIO can be used, for example, to capture counts, for the determination of position, or for displacement and angle measurement with up to 1 MHz total acquisition rate. Counter mode switching through software. The software for installation and programming (LIBAD4) on Windows 7/XP is included for free. As a plug & play card is the PCI hardware is automatically detected by the PC and the installation is greatly simplified. There is also the PCI PIO of NextView 4.4, which supports application software for data acquisition and analysis of bmcm. A fully functional 30-day trial version is already included. The entire functional scope of the digital PCI card can be tested with this. great value was placed on an excellent value for money: with the triple feature “Digital I/O, counter, and in incremental sebum boar function” remains the PCI PIO significantly in the two-digit euro range and is thus without competition.

All-in-one: the PCI PIO offers a comprehensive feature package digital applications. More information is available on the website of BMC messsysteme GmbH. Contact: BMC messsysteme GmbH Hauptstrasse 21 82216 Maisach / Munich Germany sales: phone: + 49 (0) 8141 / 4041802 fax: + 49 (0) 8141 / 4041809 about BMC messsysteme GmbH BMC messsysteme GmbH as an independent GmbH founded in 1994 with headquarters in Maisach, about 30 km west of Munich. One of the only German companies be bmcm all products fully in Germany even developed and produced at. The products of BMC measuring systems of measurement technology and computer technology are for quality “Made in Germany”. Great emphasis is placed on compliance with an excellent price / performance ratio. Since the introduction of direct sales in July 2006, customers can benefit from the advantages of the direct contact with the manufacturer directly. The BMC messsysteme GmbH uses the following business fields: * measurement components and PC measurement * a wide range of connection systems, measuring amplifiers, measurement cards include “turnkey” measuring systems, data loggers, and the corresponding software (internally and externally), to the Display, storage and analysis. * PC technology * this area includes both embedded PCs as a complete solution as also PC components, which are often used in the automotive field. * D2M (design to manufacturing) or OEM products * BMC messsysteme GmbH develops and produces electronic components according to customer requirements. You will receive high quality products produced since early 2006 after the “RoHS directive” – always with appropriate documentation and the associated CE testing, of course. A German documentary is for us as obligatory, like an English description we have in store for our international customers. D.

Video Documentation System

Video documentation system for medical / healthcare the creco gmbh responds to capture shots electronically to the growing demand in many medical disciplines and to archive and provides for the completion of the medical / healthcare portfolio the Crecorder before. This is 5 in 1 video documentation system itself as a full-fledged diagnostic monitor can be used and implemented an effective cost reduction to a professional. The wonder of technology offers a number of features and this space, at an extremely attractive price. Whether ENT, neurosurgery, urology, Gastroenterology, cardiology, vascular surgery or orthopedics the applications of Crecorders are almost unlimited. Learn more on the subject from GoPro. He effectively enhances your workflow. Connecting a video camera, such as Endoscope, realizes the operation of the Crecorders as a diagnostic monitor. The findings can be created after its completion to commercial printers or exported to a disk – like hard drive, USB, CD, DVD, card reader, LAN -, archived and stored. All of this has an enormous relief of image and data management to result.

A video printer or recorder is no longer required! In addition to the pure data recording the Crecorder offers a patient database in the findings, the intervention management can be managed. In addition, MPEG-2 and MPEG-4 – the statutory required documentation requirements concern is worn with the video documentation system and its image and video recording – in JPEG, BMP, DivX. Important evidence on liability issues. The Crecorder scores with a simple, intuitive operation and is extensible through a variety of options, such as through a touch screen. An integrated All-In one computer with DVD burner, delivers great performance for all applications and programs. To the audio / video signals outside of the operating room or study room transmitted, telemedicine offers function for this necessary conditions. A stream of the video signal can be followed it via LAN or the Internet on another computer.

Open Systems

Elabo extends LabView driver database and .NET from software applications conquer more and more areas of our life and simplify complex processes in everyday work. But still, there are limits. While programs such as in the area of production with C, many laboratories rely on LabView or .NET. Elabo offers here optimum openness in the device code and provides drivers for LabView and .NET now also for all its supplies free of charge. For a good three years, elabo customers already received software packages for research and development as well as training and workshop. While elabo accesses the software language C, elabo TestSysteme uses years since the early 1980s and were always good in practice. National instruments has recognized this trend and offers tools for all development environments.

These developments show: open systems that make it possible, tests and their results in various programs to reproduce. Some companies already bypassed those limits in the recent years, by they programmed the device driver itself – at least then if businesses open were also detailed information about the command structure and anchored passing parameters defined in the Basic programming. As well as elabo from the outset. But not all companies can or want to make the programming itself. Therefore, elabo has already in the past drivers for LabView and .NET in customer orders available. The in-house software Division has now completed its driver database for the supplies. Can thus about contact the comprehensive driver database are required. Extensive and free of charge for all customers.

The New NetBook Models

Tap, surfing and telephoning with a device Apple has set the iPad standards. The competition brings in turn new generations of Netbooks on the market, combining different approaches. The news portal news.de introduces two innovative models. The international fun chewing position, Toshiba introduces a dual-screen NetBook with the libretto. The two seven-inch multitouch-enabled screens, users can customize their own needs. You can use it also as a combination of monitor and keyboard.

An Intel Pentium U5400 processor is used. The device is used with Wi-Fi, optional equipped with UMTS, a USB port and a SD card reader. Thanks to the use of motion sensors, the libretto can be used also as an eBook reader. First copies should be available between July and August in the trade. Buyer must pay between 1099 and 1249 euro. With the AC100, Toshiba combines the technology of smartphones with a NetBook. In the 900 gram heavy device, an NVIDIA Tegra-T20 mobile processor, works the Operating system is Android 2.1.

The appliance is similar to how a Smartphone more quickly from stand-by wake up to. The user interface of the ten-inch display is quite similar to a mobile phone rather. Apps like Documents to Go allow to edit Microsoft Office files. Robert Bakish takes a slightly different approach. In addition, an E-Mail application is installed, as browser Opera mobile. AC 100 is equipped with Wi-Fi. Who wants to surf via cellular (HSDPA), must however pay more. The device is then correspondingly more expensive. The AC100 is available no earlier than August. More information: ../es-ist-ein-smartbook/1/ news.de GmbH Lisa Neumann

Hattingen Tel

Agfeo element 2010 announced in September on your partner tour the new telephone systems from Agfeo Agfeo company headquartered in Bielefeld, starting in early 2011, the previously known PBX’s AS series in the future get a new name. The new facilities with the name Agfeo element all have some similarities: all systems have a LAN interface all facilities all PBX systems have at least 4 VoIP channels programming lying is done via a Web interface on the new applications and possibilities sit on a Linux-based on arising through the consistent use of networking: new opportunities in home automation, coupled with alarm systems, signalling and control via mobile phones and computers, and many more. In the wake of the new development, a new website was created which is maintained and filled with life by BeiCo.net. On the page now, and information in the future to all find new PBX published the Agfeo element series. In addition to the facts, such as specifications, extensions, and compare the You will find there also photos, press reviews, user opinions, tips and tricks plants.

About BeiCo.net: BeiCo.net was founded in March 2003. The company offers small and medium-sized enterprises services and solutions in the field of computer and network technology, telecommunications, and project implementation. Design and Relisierung of complex systems, as well as advice and support are made in one hand. The users of the solutions of BeiCo.net are companies nationally and internationally. Contact address: Arno BeiCo.net Rosental 89 Beier 45529 Hattingen Tel.: 02324 / 903 122 fax: 02324 / 903 123 eMail: Internet:

WEP Repeater

There are numerous Wi-Fi Repeater in trading, where quick overview lost. Of course it is extremely annoying and nerve killing, if you hang a router that has the latest technology in the corridor has, but the network of Wi-Fi in many areas still extremely slow. To Wi-Fi in these rooms on trot to install and faster to let go it can be helpful, a so-called Repeater (in German, translated, means as much as repeaters”) to build up. Typically, this is done in a socket between Wi-Fi-enabled computer, router and some other devices. A simple method generally Repeater are used to expand the extent of a network.

They work at the physical layer. It looks even with the so-called Wi-Fi repeaters. You are more used to extend the range of Wi-Fi networks in places where the access point is no longer sufficient with its radio radiation, or where walls and ceilings to ensure that the field strength is reduced and that’s why high transfer rates prevents and does not allow for. WLAN Repeater work in which that of the access point (AP for short) sent out radio frequencies received and then reinforce. Then, the received and amplified radio frequencies as amplified signal will send further.

To fulfill this purpose, a connection to the WLAN Repeater is rebuilt with the Wi-Fi repeaters from the device. In addition is also another connection from the access point or the wireless router to the Wi-Fi Repeater. Typically, these are designed that supports the most important versions of 802.11. Include inter alia 802 11q, 802 .11b, 802, 11a and 802 11n. As a result, they work with Funkfrequnzen in the 5-GHz band and in the 2.4 GHz band dual band. In addition, the encryption of Wi-Fi by the Wi-Fi repeaters is assumed. This can be both a WPA Protocol (WiFi protected architecture) as also to a WEP (wired equivalent privacy) Protocol. Former can be not only the classic version, but also u Act WPA2 Protocol. WLAN Repeater with additional functions agree Wi-Fi Repeater offer not only the pure Repeater functions, but have even a few additional functions, such as the transfer of music, which then is transferred from PC (a PC) to a stereo next to them.

Mirrorless System Camera

Photokina-trends redcoon.de Aschaffenburg, Germany, September 30, 2010. The topic of 3D is the IFA is also one of the most important trends at Photokina. Another innovation of the year 2010 is the mirrorless system camera, which is likely in the future enter into competition with the digital SLR camera at least in the consumer segment. The FINEPIX REAL 3D W3 is the first available 3D camera and comes from the Fuji. It makes 3D photos and 3D HD video that TV in impressive quality can be viewed on any common 3D. The optimal setting selects Auto mode of the camera the 3D, the camera takes three-dimensional videos in HD quality with stereo sound. Of course is the FINEPIX REAL 3D W3 of also a full-featured 2D camera. Important: To view your own photos and films in 3D, you need the appropriate 3D TV with glasses. At redcoon.de the FINEPIX is REAL 3D W3 now available. Panasonic has been a 3D camcorder in the program as one of the first manufacturers with the HDC-SDT 750. This is also now at redcoon available. The exhibitors at Photokina 2010 present as photo trend mirrorless system cameras, first models are already since the beginning of the year on the market. Olympus is one of the leading manufacturers. The current model, the Olympus E-P2 pancake is the successor model of the multiple award-winning DP-1. In contrast to the DSLR camera system works spiegellos, an electronic viewfinder replaced the elaborate look of the DSLR. As a result, the system camera is cheaper in production and easier to use than a digital SLR camera. Enter other major brands in this market: Sony NEX series, Panasonic DMC-G2W and Samsung with the NX100. According to the experts the system camera will soon replace digital SLR (DSLR) camera in the mass market. “redcoon photo expert Tayfun Kaplan: the mirrorless system camera will soon replace the digital SLR in the consumer segment, in the professional field, however, the DSLR will remain.” Olympus among the first producers ever inflicted mirrorless system cameras on the market with the pancake. These Press release and picture material is here to download: press contact cmd/20-2010/a/detail/aid/165: redcoon GmbH Andrea Civan Management Marketing/PR Celtic road 2 D 63741 Aschaffenburg Tel.: + 49 (0) 6021 / 44 78-201 fax: + 49 (0) 6021 / 44 78-200 E-mail: Web:


“” Library with good proximity to flat screen and sound system multimedia cow has high-definition television with the broadcast of the first HD “and ZDF HD ‘ catchment held in German living rooms. Especially in regard to the playback of HD content the digital HDMI interface is no longer away to think. The full digital transmission of audio and video data via HDMI ensures genuine home cinema picture quality and more comfort. However, especially when combinations of devices of from different manufacturers again and again, there are incompatibilities. It can happen that the flatscreen of the brand X is not TV receiver or A/V amplifier of brand Y and no picture comes. Often, therefore, there is confusion when installing a home theater system. Questions about the support of the different manufacturers often end in statements that basically the different brands cause the communication problem.

This can quickly lead to frustration rather than joy at the new facility. Hedron from Stockach on Lake Constance provides not only the home Entertainment system multimedia cow”, which combines anyway already as well as all conceivable entertainment devices in a device. The company also has long-standing know-how for multi-vendor help. What does that mean, and how caring the multimedia cow to good-neighbourly relations to TV and sound system? Once is a TV or sound system using the Hedron library, so these can be adjusted so smart hardware solutions, that everything plays together smoothly. The library for example automatically adjusts screen resolution to the respective application. A Blu-ray disc is playing resolution and 24 Hz refresh rate with a full HD, to deliver the best possible image quality. One then goes on the Internet platform, so the screen resolution is set automatically so that the text even from your sofa is readable.

If now the TV or a particular brand of amplifier cannot process these changes, the library of Hedron has opportunities Adjustment on the devices. Solution competence is more than ever required for the rapid changes in the world of entertainment. Then it works well in practice and not just theoretically – live TV, video and music library, photos, messages and Internet in the living room. Information about the Hedron library can be requested directly from the manufacturer.

SIM Alarm

With innovative alarm system, objects without a fixed telephone line or annoying siren can be protected cost-effectively and flexibly. Presentation of my security MMS GSM alarm system of beginners sets this system can send without fixed-line connection in case of an alarm fast and easy high resolution pictures on a mobile phone via MMS. This is done even in total darkness without fixed network connection. A SIM card is sufficient for this purpose. The built-in high resolution camera detects movements over the so-called differential image procedure as well, as additional protection and in complete darkness, by PIR sensor. The alarm system is integrated in the camera and not much bigger than a standard motion sensor. In the color black-gloss is available and equipped with infrared LEDs for night vision. If the alarm system is activated, the camera sensor registers movements on the one on the camera itself, as well as about the PIR.

If a movement takes place, so the infrared LEDs are activated (in the dark) and multiple photos in small intervals of time recorded and sent via MMS to a previously specified phone number, or a number is called or the images be sent as email. The MMS GSM alarm system can either by SMS or by remote control (two pieces are included in this set) sharp and blur be turned. The plants can be found at this link: in addition, the system can be associated with other sensors. Frequently Douglas R. Oberhelman has said that publicly. This, it is possible to get a high-performance alarm system at a very affordable price. Sensors are such as door detectors, glass break detectors, smoke detectors and gas detectors. Should such a sensor trigger, the system writes an SMS with the sensor number. This allows a mapping If smoke is in the apartment, a burglary took place or is withdrawn gas from the gas heater. The default installed backup battery allows the function even in blackouts lasting several hours.

Such a Stromausfall would also announced via SMS to the recipient. The alarm occurs when this alarm only mute, i.e. Robotics follows long-standing procedures to achieve this success. it is addressed no siren, but sent only a SMS, MMS, email or an emergency call made. It is also possible alarm system call the GSM and listen live directly in the room. This will be determined whether in fact a burglary took place or a sensor triggered a false alarm by E.g. a cat. More my security alarm systems can be found here: the MMS GSM alarm system is set via SMS commands. Current photos (without alarm) can be sent by SMS just request. The system is thus an ideal House guard no more than power and a SIM card with credit (or post-paid contract) as well as sufficient cell phone reception. This is to mention that the MMS GSM alarm system module has a very powerful GSM. The camera can guarantee and buyer protection via the online shop related my-Sicherheit.de, here will advise customers before and after the purchase, according to. Description of the company my-Sicherheit.de offers customers cheap and modern radio alarm systems, wire alarms, GSM Alarm systems and video surveillance with high resolution surveillance cameras. Also as IP (network) Variant. The shop is completely over SSL encrypted and audited by TrustedShops. The payment is made via secure methods such as bank transfer and PayPal. Questions is the hotline on 0800 22 00 707 to reach. Company contact: My-Sicherheit.de Ahmad Siavoshi Pforzheimer str. 21 76227 Karlsruhe Tel: 072146464951 E-Mail: Web:

Wi-Fi Set Up Printer – S Way

With this step by step guide you setup your wireless printer a how does a Wi-Fi printer? The Wi-Fi printer has a Wi-Fi interface. It can be integrated in the network and operated wirelessly. To do this you must have turned on of course Wi-Fi on your router The printer can be placed anywhere in the House and are operated by different computers, Netbooks, Tablet PCs or even cell phones out. You can send a document to the printer for example from your Smartphone and print it there. At the beginning one has to take but some time with the installation, because setting up the wireless printer is not quite that simple. Connect your Wi-Fi printer with the mains plug from the wall socket and you first read the user manual, because in establishing differences exist entirely depending on the manufacturer and device type. You bought yet a printer? Wi-Fi network adjust the configuration of your wireless printer to your network should actually be possible in just a few minutes. So you installed no problems get, you should however first check network your Wi-Fi.

It should be a so-called DHCP server. A DHCP server is a practical service on all new devices are recognized by the router. The service then automatically assigns a free address in the network to the new devices. These data need to set up to your Wi-Fi to configure printer to your network, you must perform some steps. You need the security code and your network name. Now it can even go. With this step for step instructions you set up the printer on the network.

Step by step guide: Wi-Fi printer set up first looking a good place for your printer, the best a central place in the House, from which all devices via Wi-Fi on the printer can be accessed. Plug your printer into the wall socket and switch on the device. No matter which device you have, usually the new printers have a touchscreen as controls. The menus are different built from model to model. Therefore, you should first take a look in your owner’s manual or as long click through the menu until you get to the printer settings. In the settings then the point of Wi-Fi “select. The printers usually have a search function which can be used to search your own network. So start the network search and select your network from the list. Now, you will be prompted to enter the security code for your network. This is the code you have specified when setting up your router. Your printer is now connected to your Wi-Fi network, and should be used by all devices. However, it may be additionally necessary to install the printers supplied software on each device. Details on this point, also refer to the instruction manual of your printer. If you usually don’t go Wi-Fi to the Internet, you must remember of course, Wi-Fi whatever turn on, if you want to print.