Tag: house

Roller Shutter Systems

Blinds are stepchildren of the House. Who builds have so many decisions, that the style, color and material of the blind usually very far back are. What a pity. Because blinds have not only an important function, they are also the exterior facade and thus the appearance of a House. Blinds can be wind, snow and rain outside.

You protect the House from any weather and play a not insignificant role in the insulation. Who lowers its shutters in winter evenings, can save on heating costs. Also noise is reduced through the blinds. And another advantage: light and air vents, the Chamber can be ventilated despite lowered shutters. Blinds can be meaningfully integrate into the security concept for your home by Hochschiebesicherungen. So burglars do not penetrate by pushing up the stores in your home.

What we in addition to thermal insulation and energy savings are a further advantage of the component, the burglary protection. There are two types of blinds. Once the familiar built-in roller shutters in roller shutter boxes above the Windows. They are protected and therefore relatively maintenance free. However, they are still heat or cold bridges. Because here, the insulation is missing the House wall, cold penetrates more easily or escaping heat faster the roller shutter box. Tower blinds are another variant. They are prefabricated with the window and fitted. That is practical and affordable. And servicing Tower blinds are easily accessible. So shutters can be installed in existing buildings later. Usually no major structural changes are necessary. Shutters are today mostly made of plastic, which is cheaper and the blinds are not so hard. Pulling up so easy. Where of course also here not necessarily on a hand-crank must be used. Here, Motors today facilitate the handling tremendously. Builders of new buildings opt increasingly for motorized blinds. Button, raise or lower them himself. Some are also Sun-dependent control. Rolling shutters is the old spelling for roller shutters.

Water Protection Systems

Protection are integrated in each washing machine today and in every dishwasher against water damage in the washing machine and Geschirrsuler Wassserschutzsysteme for household appliances. But how about Aqua stop and co. To prevent damage by bursting water hoses as it was formerly often effectively, the industry water protection systems developed for dishwasher and washing machine. Were used mostly simple mechanical Aqua stop systems, representing only a very little protection against water damage. The function was extremely simple. A mechanical valve the water supply stopped when a certain flow rate of the water has been exceeded by the bursting of the inlet hose.

If an error occurs such as a slow leaks and small leaks at the cuff, such water stop offered no protection systems. When the appliances always better water protection systems were developed in the course of time manufacturers. These are stop, Aqua protection and waterproof system today under the name Aqua known. But based these systems essentially on the same components. Water entering the washing machine so the faucet sits a solenoid valve connected magnetically by the washing machine. This releases only water when the washing machine is turned on. Double-walled water hose is still the so-called cover hose as security. Visit Peter Asaro for more clarity on the issue.

This one has to infer the task in any leaks water into the bottom tray. The washing machine itself is in the bottom tray. A Microswitch is fitted to prevent overflowing the tub which is operated by a float when leaking water. This Microswitch then immediately switches off the power supply to the solenoid valve to the water tap so that the water inlet is blocked. This protects the washing machine itself and the entire environment through this system the machine is effectively recognized even small leaks. The individual producers have often still together Built-in protection systems like moisture sensors and more… You can sum up such a security system consists of the solenoid valve, the Double inlet hose, water hose leak, the tray at the bottom and the micro switch which is activated in case of failure of the float. Only through this combination of different protection systems, water damage have become extremely rare by household appliances such as washing machines and dishwashers. However special errors can occur with these systems that affect the function of the machine. So spare parts such as the Aqua are needed frequently stop valve with inlet hose or the float switch. The benefits of these systems is however not to under-estimate are most effectively prevented but much larger damage. Small errors such as leaks in the hoses are therefore without consequence. These can be purchased as a spare part and replaced. All of these parts are usually easy to get in the stores and can be replaced by the experienced handymen at some caution. On the website, the customer can order the required spare parts online shop. Many Home appliances spare parts are in stock and can be delivered quickly. On the pages of waschmaschinen_tipps_fehlersuche.htm is the customer tips, explanations and assistance with troubleshooting and select of the required replacement part.